Scuba Trimix Analyzer Analox ATA PRO Oxygen and Helium

TRIMIX ANALOX ATA PRO ANALYZER FOR OXYGEN AND HELIUM

Trimix Analox ATA Pro analyzer is a compact, light and very robust instrument, ideal to always carry with you, to accurately analyze the oxygen and helium contained in the mixture of your cylinder.
Analox ATA Pro is equipped with a backlit LCD display with a Helium calibration and zeroing system.
A compensation table is also supplied with the Analox analyzer allowing you to correct and calibrate the unit for temperature and humidity and allow you to use the analyzer in any environment.

The helium and oxygen analyzer Analox Ata Pro (Trimx) can be connected to flow reducers, which can be purchased separately, which facilitate the operation. 

Why to use Trimix Analyser?

To start a safe dive, it is necessary to know the concentration of helium, oxygen and nitrogen within the gas mix used by divers.
The ATA Pro Trimix analyzer does not come with a flow regulator but can be purchased as an accessory. 

Monitoring the oxygen levels within your gas mix by using the O2EII Pro nitrox analyser will determine your entire dive plan allowing you to plan the depth, time and decompression stages allowing for a carefree dive.

The addition of a spigot that takes the hose of a BCD adapter, allows the unit to be used while checking air quality at the tank or while the user is connected to their regulator via their BCD’s low pressure inflator.

Please note the O2EII Pro nitrox analyser does not come with a BCD flow restrictor.

How to carry out GAS analysis?

Very easy! Turn on the Trimix ATA Pro analyzer and perform instrument calibration or He zero. Place the flow adapter on the tap of your tank (or through the BCD adapter or flow regulator if you bought them) and very gently open the valve until you hear the hiss of the air coming out and look at the display. Once the number on the display has stabilized for oxygen, mark the measurement and press the button to switch to the helium reading until it stabilizes. Pressing the "mode" button again displays the gas balance mode with the deduced nitrogen concentration.

THE PACKAGE INCLUDES

- 1 Trimix ANALOX ATA Pro analyzer
- 1 Connection tube
- 1 Flow adaptor

Specifications:

Range: 0.1-100% Helium, 0.1-100% Oxygen, 0.1% increments
Accuracy: 1% Helium, 0.2% Oxygen
Sensor: Electrochemical O2, Helium sensor fully compensated for the presence of oxygen and thanks to the helium zero function it provides a higher level of accuracy.
Analysis: From cylinder Valve
Display: Backlit sliding digital display
Automatic shutdown: after 10 minutes
Sensor life: helium sensor 10 years, oxygen sensor 4-5 years.
Sensors and battery replaceable by the user and protected by a waterproof membrane
Waterproof case
Power supply: 1x 1.5V AA battery not included
Working temperature: from 0°C to +50°C
Dimensions: 195mm x 130mm x 62mm
Weight: 400 g